| SYSTEM OVERVIEW |
| System overview |
"800VA
line interactive UPS for PCs and workstations, Battery supported AC
outlets with surge suppression, Audible alarms, Self-test/alarm cancel
switch, Automatic voltage regulation (AVR), Cold-start ability, two C13
to C14 jumper cables, Single line TEL protection, Status indicator
LEDs, USB monitoring port, USB cable, Attractive all-black cabinet,
Battery access panel, 50/60Hz auto-sensing ability" |
| Voltage compatibility |
Compatible with 220-240V nominal applications |
| Frequency compatibility |
50/60 Hz auto-sensing |
| OUTPUT |
| Output VA |
800 |
| Output watts |
475 |
| Output nominal voltage |
230v |
| Output voltage regulation |
BATTERY MODE: PWM sine wave 230V +/-5% |
| Output frequency regulation |
LINE MODE: Passes line frequency of 50/60Hz +/-10% BATTERY MODE: Inverter output regulated to 50/60Hz +/-0.5Hz |
| Outlet quantity / type |
4 IEC-C13 |
| INPUT |
| Maximum input amps |
2.4 |
| Input connection type |
IEC320-C14 inlet accepts a variety of replacement cordsets to accommodate country or site specific wall receptacles |
| Input cord length |
Includes
two 1.8m IEC320-C13 to C14 interconnection cables (additional C13 to
C14 interconnection cables available, part# P004-006) |
| BATTERY |
| Full load runtime |
6 minutes (800VA) |
| Half load runtime |
19 minutes (400VA) |
| DC system voltage |
12 VDC |
| Typical battery lifespan |
3-6 years, depending on usage |
| Battery recharge rate |
2-4 hours to 90% |
| Replacement Battery Cartridge |
RBC51 |
| VOLTAGE REGULATION |
| Voltage regulation description |
Line interactive voltage regulation corrects brownouts as low as 159V back to usable levels |
| Direct pass through |
Voltages of 199V and greater are passed through to connected equipment unchanged |
| Brownout correction |
Input voltages between 159 and 199 are boosted by 14% |
| LEDS ALARMS & SWITCHES |
| Front panel LEDs |
4 front panel LEDs indicate line power status, battery power status, battery low/replace status and UPS overload |
| Alarms |
Audible
alarm with 15 second delay sounds to indicate loss of utility power.
Alarm can be silenced by pressing front panel alarm cancel button. Once
silenced, alarm will re-sound when approximately 2 minutes runtime
remain. |
| Switches |
Includes 2 front panel switches - one main on/off/standby switch and one dual function "alarm cancel" / "self test" button |
| SURGE / NOISE SUPPRESSION |
| AC surge suppression |
340 joules |
| AC suppression response time |
Instantaneous |
| Dataline suppression |
Tel/DSL |
| EMI / RFI AC noise suppression |
Yes |
| PHYSICAL |
| Shipping weight (lbs) |
23.2 |
| Shipping weight (kg) |
10.5 |
| Unit weight (lbs) |
21.2 |
| Unit weight (kg) |
9.6 |
| Unit Dimensions (HWD/in) |
10.75 x 5.25 x 7.25 |
| Unit Dimensions (HWD/cm) |
27.3 x 13.4 x 18.4 |
| Shipping Dimensions (HWD/in) |
14 x 8.5 x 10.5 |
| Shipping Dimensions (HWD/cm) |
35.6 x 21.6 x 26.7 |
| Material of construction |
PVC |
| Form factors supported |
Tower |
| Cooling method |
Convection |
| Battery Access |
Battery access door allows user replacement of UPS batteries. |
| ENVIRONMENTAL |
| Relative Humidity |
0 to 95%, non-condensing |
| COMMUNICATIONS |
| Network monitoring port |
USB |
| Software and cabling included |
USB cabling included, PowerAlert software available for free download at www.tripplite.com |
| WatchDog compatibility |
Yes,
compatible with Tripp Lite's Watchdog system service to restore
operation to locked equipment through soft reboot of application/OS or
hard power off/on reboot of connected equipment; ideal for unattended
kiosk applications |
| LINE / BATTERY TRANSFER |
| Transfer time from line power to battery mode |
2-4 milliseconds |
| Low voltage transfer to battery power |
Switches
to battery power as line voltage decreases to 159 volts or less. Resets
to line power mode as line voltage increases to 167V or higher. |
| High voltage transfer to battery power |
Yes |
| CERTIFICATIONS |
| Certifications |
CE 62040, GOST, SASO, IRAM, RoHS-compliant |
| WARRANTY |
| Product warranty |
2 year product warranty |
| SPECIAL FEATURES |
| Cold Start |
Yes, inverter can be "cold started" to enable temporary AC output during a power failure |
| Appearance |
Attractive all-black tower UPS |
